Remove The Fan Power Board - Fujitsu SPARC ENTERPRISE T5140 Service Manual

"Servicing Paddle Cards" on page 174
■

▼ Remove the Fan Power Board

If you are removing the fan power boards to access the paddle card or hard drive
cage, you must remove the server from the rack. See
Rack" on page 64.
1. Power off the server.
See "Removing Power From the System" on page
2. Disconnect the power cables.
3. Extend the server into the maintenance position.
See "Extend the Server to the Maintenance Position" on page
Note – If you are removing the fan power boards to service the paddle card or hard
drive cage, you must remove the server from the rack. See the topic
Server From the Rack" on page
4. Attach an antistatic wrist strap.
5. Remove the top cover.
See "Remove the Top Cover" on page
6. Remove the fan modules.
Note – If you are replacing a defective fan power board, remove only the fan
modules needed to access the fan power board.
See "Remove a Fan Module" on page
7. Remove the Phillips screw that secures the fan power board to the chassis.
60.
64.
67.
131.
Servicing Boards and Components
"Remove the Server From the
63.
"Remove the
149