●
Type poweron at the service processor prompt.
-> poweron
You will see an -> Alert message on the system console. This message indicates
that the system is reset. You will also see a message indicating that the VCORE has
been margined up to the value specified in the default .scr file that was
previously configured. For example:
-> start /SYS
Related Information
"Power On the Server Using the Front Panel Power Button" on page 182
■
▼ Power On the Server Using the Front
Panel Power Button
●
Use a pointed object, such as a pen or pencil, to press the Power button on the
front panel.
See
more information on the Power button.
Related Information
"Power On the Server Using the poweron Command" on page 181
■
182
SPARC Enterprise T5140 and T5240 Servers Service Manual • July 2009
"Power On the Server Using the Front Panel Power Button" on page 182
for