FIGURE:
3. Remove the power distribution board.
See
4. Remove the No. 2 Phillips screw securing the power supply backplane to the
power supply bay.
5. Lift the power supply backplane up and off its standoffs and out of the system.
FIGURE:
6. Place the power supply backplane on an antistatic mat.
172
SPARC Enterprise T5140 and T5240 Servers Service Manual • July 2009
Removing a Power Supply From a SPARC Enterprise T5240 Server
"Remove the Power Distribution Board" on page
Removing a Power Supply Backplane From a SPARC Enterprise T5240 Server
164.