Install Replacement Fb-Dimms - Fujitsu SPARC ENTERPRISE T5140 Service Manual

FIGURE:
8. Grasp the top corners of the faulty FB-DIMM and lift it out of its slot.
9. Place the FB-DIMM on an antistatic mat.
10. Repeat
11. If you do not plan to install replacement FB-DIMMs at this time, install filler
panels in the empty slots.
Related Information
"Install Replacement FB-DIMMs" on page 86
■
"Verify Successful Replacement of Faulty FB-DIMMs" on page 88
■

▼ Install Replacement FB-DIMMs

Before beginning this procedure, ensure that you are familiar with the information
provided in these topics:
"Preparing to Service the System" on page 57
■
"FB-DIMM Configuration Guidelines for SPARC Enterprise T5140 Servers" on
■
page 94
Note – If the server is already extended and open, begin the procedure at
1. Extend the server to the maintenance position.
See
86 SPARC Enterprise T5140 and T5240 Servers Service Manual • July 2009
Removing FB-DIMMs
Step 7 through Step 9
"Extend the Server to the Maintenance Position" on page
for any other FB-DIMMs you intend to remove.
Step 4.
63.