Emergency Switch-Off; Cable Routing Of The Sparc Enterprise M8000 Server; Cable Routing When The External I/O Expansion Unit Mounted - Fujitsu SPARC ENTERPRISE M9000 Service Manual

4.6

Emergency Switch-Off

In emergency situations (such as smoke or flames are coming from the server), you
need to immediately stop the use and turn off the power supply.
Caution – If smoke or flames are coming from the server, switch off all main line
switches immediately, or use the customer's distribution panel to immediately stop
the power supply. Regardless of the job at hand, remember to give top priority to fire
prevention.
4.7 Cable Routing of the SPARC Enterprise
M8000 Server
In the rack space for the SPARC Enterprise M8000 server, when a 19-inch unit such
as the external I/O expansion unit mounted besides the rack-mountable dual power
feed, the cables connected to the unit must be properly routed.
This section provides an example of the cable routing when the external I/O
expansion unit mounted. Perform the cable routing properly with reference to this
section while following the precautions.
To do maintenance on the I/O Unit or the FAN unit, you need the cable routing in
the same manner. See
4.7.1 Cable Routing When the External I/O Expansion
Unit Mounted
FIGURE 4-10
rack space. Up to 3 external I/O expansion units can be mounted in the rack space
for the SPARC Enterprise M8000 server. Follow the precautions below when routing
the cables.
4-34 SPARC Enterprise M8000/M9000 Servers Service Manual • June 2010
Chapter 7 and
shows the example of the external I/O expansion units mounted in the
Chapter 8.