Servicing The Hard Drive Backplane - Fujitsu SPARC ENTERPRISE T5140 Service Manual

7. (SPARC Enterprise T5240 server) Install the fan modules.
See
8. Install the top cover.
See
9. (SPARC Enterprise T5140) Install the inner glides.
Slide each inner glide onto the mounting studs on the server until the glide snaps
into place.
10. (SPARC Enterprise T5140) Install the server into the rack.
See
11. Install the hard drives.
Note – Take care to be certain you are installing the hard drives in the correct drive
bays.
See
12. Install the DVD/USB module.
See
13. Connect the power cords.
Note – As soon as the power cords are connected, standby power is applied.
Depending on how the firmware is configured, the system might boot at this time.
14. Power on the system.
See
Related Information
"Remove the Hard Drive Cage" on page 152
■

Servicing the Hard Drive Backplane

These topics explain how to remove and install hard drive backplanes.
"Hard Drive Backplane Overview" on page 157
■
"Remove the Hard Drive Backplane" on page 157
■
156 SPARC Enterprise T5140 and T5240 Servers Service Manual • July 2009
"Install a Fan Module" on page
"Install the Top Cover" on page
"Reinstall the Server in the Rack" on page
"Install a Hard Drive" on page
"Install the DVD/USB Module" on page
"Power On the Server Using the poweron Command" on page
133.
177.
178.
73.
147.
181.