Fujitsu SPARC ENTERPRISE T5140 Service Manual page 213

The following table identifies the I/O components in the server and points to
instructions for servicing them.
I/O Components (SPARC Enterprise T5140 Servers)
TABLE:
Item FRU
1 Top cover
2 Left control panel light
pipe assembly
3 Hard drive cage and
hard drive backplane
4 Hard drives
5 DVD/USB module
6 Right control panel light
pipe assembly
Replacement Instructions
"Remove the Top Cover"
on page 67
"Install the Top Cover"
on page 177
"Servicing Front Control
Panel Light Pipe
Assemblies" on page 160
"Servicing the Hard
Drive Cage" on
page 151,
"Servicing the Hard
Drive Backplane" on
page 156
"Remove a Hard Drive"
on page 71
"Install a Hard Drive"
on page 73
"Servicing DVD/USB
Modules" on page 144
"Servicing Front Control
Panel Light Pipe
Assemblies" on page 160
Identifying FRUs in SPARC Enterprise T5140 Servers
Notes
Removing top cover if
the system is running
will result in immediate
shutdown.
Light pipe bracket is not
a FRU.
Hard drive cage must be
removed to service hard
drive backplane and
front control panel light
pipes.
Hard drives must be
removed to service the
hard drive backplane.
Must be removed to
service the hard drive
backplane.
Light pipe bracket is not
a FRU.
FRU Name (If Applicable)
N/A
N/A
/SYS/SASBP
See "Four-Drive Capable
Backplane Configuration
Reference" on page 77 or
"Eight-Drive Capable
Backplane Configuration
Reference" on page 78
/SYS/DVD
/SYS/USBBD
N/A
187