Servicing Dvd/Usb Modules - Fujitsu SPARC ENTERPRISE T5140 Service Manual

TABLE:
Component
Hard drive backplane
Front control panel light pipe
Power distribution board
Power supply backplane (SPARC
Enterprise T5240 server)
Paddle card
Note – Fan modules are the only chassis components that may be removed or
installed with power present.
Caution – Never run the server with the covers removed. Hazardous voltage is
present.
Caution – Chassis covers must be in place while the server is running to ensure
proper air flow within the chassis. Running the server with the covers removed may
result in damage to the equipment.
Related Information
"General Safety Information" on page 57
■

Servicing DVD/USB Modules

These topics explain how to remove and install DVD/USB modules.
"DVD/USB Module Overview" on page 145
■
"Remove the DVD/USB Module" on page 145
■
"Install the DVD/USB Module" on page 147
■
144 SPARC Enterprise T5140 and T5240 Servers Service Manual • July 2009
Components That Require Removal of System Power Before Servicing is
Performed
Servicing procedures
"Servicing the Hard Drive Backplane" on page 156
"Servicing Front Control Panel Light Pipe Assemblies"
on page 160
"Servicing Power Distribution Boards" on page 163
"Servicing Power Supply Backplanes (SPARC
Enterprise T5240 Servers)" on page 170
"Servicing Paddle Cards" on page 174