Service-Related Ilom Command Summary - Fujitsu SPARC ENTERPRISE T5140 Service Manual

Service-Related ILOM Command Summary

The following table describes the ILOM shell commands most frequently used when
performing service related tasks. The middle column identifies the ALOM CMT
command that produces the same result.
Service-Related Commands
TABLE:
ILOM Command
help [command]
set /HOST
send_break_action=break
set /SYS/component
clear_fault_action=true
start /SP/console
show /SP/console/history
26 SPARC Enterprise T5140 and T5240 Servers Service Manual • July 2009
ALOM CMT Command
help [command]
break [-y][-c][-D]
• -y skips the confirmation
question.
• -c executes a console command
after the break command
completes.
• -D forces a core dump of the
Solaris OS.
clearfault UUID
console [-f]
• -f forces the console to have read
and write capabilities.
consolehistory [-b lines|-e lines|-v]
[-g lines] [boot|run]
The following options enable you to
specify how the output is
displayed:
• -g lines specifies the number of
lines to display before pausing.
• -e lines displays n lines from the
end of the buffer.
• -b lines displays n lines from the
beginning of the buffer.
• -v displays the entire buffer.
• boot|run specifies the log to
display (run is the default log).
Description
Displays a list of all available
commands with syntax and
descriptions. Specifying a command
name as an option displays help for
that command.
Takes the host server from the OS to
either kmdb or OpenBoot PROM
(equivalent to a Stop-A), depending
on the mode Solaris software was
booted.
Manually clears host-detected
faults. The UUID is the unique fault
ID of the fault to be cleared.
Connects you to the host system.
Displays the contents of the
system's console buffer.