Install A Battery; Servicing The Scc Module; Scc Module Overview - Fujitsu SPARC ENTERPRISE T5140 Service Manual

▼ Install a Battery

1. Unpack the replacement battery.
2. Pry the clip open slightly and insert the battery into the battery holder.
Looking at the system from the rear, install the positive side (+) facing to the right,
towards the chassis wall and away from the center of the motherboard.
3. Install PCIe/XAUI riser 2.
See
4. Use the ILOM setdate command to set the day and time.
See the Integrated Lights Out Manager (ILOM) 3.0 Supplement for SPARC Enterprise
T5140 and T5240 Servers.
5. After returning the server to operation, check and reset the Solaris OS date.
Related Information
"Remove a Battery" on page 115
■

Servicing the SCC Module

These topics explain how to replace a faulty SCC module.
"SCC Module Overview" on page 116
■
"Remove the SCC Module" on page 117
■
"Install the SCC Module" on page 117
■

SCC Module Overview

The SCC module contains system host ID, MAC addresses, and configuration
variable settings for ILOM. If you are replacing a motherboard, you must move the
SCC module from the old motherboard to the new one.
Related Information
"Remove the SCC Module" on page 117
■
"Install the SCC Module" on page 117
■
116 SPARC Enterprise T5140 and T5240 Servers Service Manual • July 2009
"Install a PCIe/XAUI Riser" on page 107