Hdd Data Cable Routing For Sas Raid Controller Cards In Four-Disk Capable Sparc Enterprise T5140 Servers - Fujitsu SPARC ENTERPRISE T5140 Service Manual

HDD Data Cable Routing for SAS RAID
Controller Cards in Four-Disk Capable
SPARC Enterprise T5140 Servers
There are two SAS controller card options for the SPARC Enterprise T5140 and T5240
servers (both options support RAID). The standard option uses the on-board SAS
controller card preinstalled on every server. The second option is a StorageTek SAS
RAID Internal Host Bus Adapter (HBA) PCIe card. The internal cabling of your
server will be different depending on the SAS controller card option you choose.
Hard Drive Data Cable Routing for SAS RAID Controller Card in Four-Disk
FIGURE:
Capable SPARC Enterprise T5140 Servers
Figure Legend
1 Routing the cable through the right channel on the motherboard handle
2 Routing the cable between the FB-DIMMs and CMP1 processor
3 Heat-shrink tubing
4 Routing the cable through the fan midwall to the hard drive backplane
Identifying FRUs in SPARC Enterprise T5140 Servers 193