How To Switch From The System Console To The Service Processor; How To Switch From The Service Processor To The System Console - Fujitsu SPARC ENTERPRISE T5140 Service Manual

How to Switch From the System Console to the Service
Processor
The following example shows the character sequence (hash-period) used to change
from the system console to the service processor:
ok #.
How to Switch From the Service Processor to the System
Console
The following example showiest ILOM command for changing from the service
processor to the system console:
-> start /SP/console
If you are connected to the service processor using the ALOM CMT shell, use the
following command to change to the system console:
sc> console
Detecting and Managing Faults 25