Remove The Air Baffle; Remove The Fan Cage - HP DL370 - ProLiant - G6 Performance User Manual

Extend the server from the rack (on page 24).
o
Open the locking latch, slide the access panel to the rear of the chassis, and remove the access
2.
panel.
If the locking latch is locked, use a T-15 Torx screwdriver to unlock the latch.

Remove the air baffle

Power down the server (on page 22).
1.
Do one of the following:
2.
Open or remove the tower bezel, as needed
o
Extend the server from the rack (on page 24).
o
Remove the access panel (on page 25).
3.
Remove the air baffle.
4.

Remove the fan cage

Power down the server (on page 22).
1.
Do one of the following:
2.
Open or remove the tower bezel, as needed
o
Extend the server from the rack (on page 24).
o
Remove the access panel (on page 25).
3.
Remove the air baffle (on page 26).
4.
("Open or remove the tower
("Open or remove the tower
bezel" on page 22).
bezel" on page 22).
Operations 26