2. Install the node into the chassis.
3. Connect all peripheral cables to the node.
4. Power up the node.
Remove the air baffle
Procedure
1. Power down the node .
2. Disconnect all peripheral cables from the node .
3. Remove the node from the chassis.
4. Place the node on a flat, level surface.
5. If installed in a 2U node, remove the FlexibleLOM 2U node PCI riser cage assembly.
6. If installed in a 2U node, remove the three-slot PCI riser cage assembly.
7. Remove the air baffle:
•
1U air baffle
Remove the air baffle
51