Battery Replacement - HP DL370 - ProLiant - G6 Performance User Manual

Hp proliant dl/ml370 g6 server user guide
Hide thumbs Also See for DL370 - ProLiant - G6 Performance:
Table of Contents

Advertisement

Battery replacement

If the server no longer automatically displays the correct date and time, you may need to replace the
battery that provides power to the real-time clock. Under normal use, battery life is 5 to 10 years.
WARNING:
pentoxide, or an alkaline battery pack. A risk of fire and burns exists if the battery pack is not
properly handled. To reduce the risk of personal injury:
Do not attempt to recharge the battery.
Do not expose the battery to temperatures higher than 60°C (140°F).
Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
Replace only with the spare designated for this product.
To remove the component:
Power down the server (on page 22).
1.
Do one of the following:
2.
Open or remove the tower bezel, as needed
o
Extend the server from the rack (on page 24).
o
Remove the access panel (on page 25).
3.
Remove the air baffle (on page 26).
4.
Remove the battery.
5.
IMPORTANT:
configuration. After replacing the battery, reconfigure the system through RBSU.
To replace the component, reverse the removal procedure.
The computer contains an internal lithium manganese dioxide, a vanadium
Replacing the system board battery resets the system ROM to its default
("Open or remove the tower
bezel" on page 22).
Battery replacement 112

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Proliant dl370 g6Proliant ml370 g6

Table of Contents