Expansion board options
The server supports up to ten PCIe expansion boards. For more information, see "System board
components (on page 13)."
IMPORTANT:
in expansion slot 1.
To install the component:
Power down the server (on page 22).
1.
Do one of the following:
2.
Open or remove the tower bezel, as needed
o
Extend the server from the rack (on page 24).
o
Remove the access panel (on page 25).
3.
Remove the air baffle (on page 26).
4.
Open the expansion board retainer.
5.
The HP SAS Expander Card and the HP NC524SFP Adapter are not supported
("Open or remove the tower
Hardware options installation 73
bezel" on page 22).