HP DL370 - ProLiant - G6 Performance User Manual page 66

Using a T-15 Torx screwdriver, install the locking brackets.
10.
Connect the drive cage bay 3 power cable (BP3) to the two-bay LFF drive cage backplane.
11.
Connect the two-bay LFF drive cage to one of the following:
12.
A six-bay LFF backplane. See step 13.
o
An optional SAS controller. See step 14.
o
Connect the SAS/SATA controller cable:
13.
Connect the "6LFF" labeled connector to SAS connector 5-6 on the six-bay LFF backplane.
a.
Connect the "2LFF" labeled connector to the two-bay LFF drive cage backplane.
b.
Hardware options installation 66