Redundant Hot-Plug Power Supply Option - HP DL370 - ProLiant - G6 Performance User Manual

Install the redundant fans.
7.
Install the fan cage.
8.
Install the air baffle.
9.
Install the access panel.
10.
Do one of the following:
11.
Close or install the tower bezel, as needed.
o
Slide the server back into the rack.
o
Power up the server (on page 22).
12.

Redundant hot-plug power supply option

The server supports a second hot-plug power supply to provide redundant power to the system if the
primary power supply fails.
WARNING:
Do not disable the power cord grounding plug. The grounding plug is an important safety
•
feature.
• Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.
Unplug the power cord from the power supply to disconnect power to the equipment.
•
• Do not route the power cord where it can be walked on or pinched by items placed against
it. Pay particular attention to the plug, electrical outlet, and the point where the cord
extends from the equipment.
WARNING:
power supply blank to cool before touching it.
WARNING:
the power cord to the power supply until the power supply is installed.
To reduce the risk of electric shock or damage to the equipment:
To reduce the risk of personal injury from hot surfaces, allow the power supply or
To reduce the risk of electric shock or damage to the equipment, do not connect
Hardware options installation 51