Connect the server data and power cables to the rear of the device.
10.
Slide the media drive fully into the bay until it is seated securely.
11.
Install the fan cage.
12.
Install the air baffle.
13.
Install the access panel.
14.
Do one of the following:
15.
Close or install the tower bezel, as needed.
o
Slide the server back into the rack.
o
Power up the server (on page 22).
16.
Slimline optical drive option
To install the component:
Power down the server (on page 22).
1.
Do one of the following:
2.
Open or remove the tower bezel, as needed
o
Extend the server from the rack (on page 24).
o
Remove the access panel (on page 25).
3.
Remove the air baffle (on page 26).
4.
Remove the fan cage (on page 26).
5.
Remove the optical drive blank.
6.
("Open or remove the tower
Hardware options installation 71
bezel" on page 22).