HP DL370 - ProLiant - G6 Performance User Manual page 88

Install the I/O bezel.
24.
Route and connect the front video connector cable to the front video connector on the system board.
25.
Install the Systems Insight Display.
26.
Install the SFF drive cages.
27.
Install the two-bay LFF drive cage, if removed.
28.
Install the DVD-ROM drive, if removed.
29.
Connect the drive cables.
30.
Install the fan cage.
31.
Install the air baffle.
32.
IMPORTANT:
setting on the system maintenance switch.
Set position 3 on the system maintenance switch to On.
33.
For the system to operate properly in a rack configuration, be sure to change the
Hardware options installation 88