Pci Express* Dc Specifications; Dmi2 / Pci Express* Dc Specifications; Reset And Miscellaneous Signal Dc Specifications; Miscellaneous Signals Dc Specifications - Intel BX80619I73960X Datasheet

Electrical Specifications
Table 7-19. Miscellaneous Signals DC Specifications
Symbol
PROC_SEL_N Signal
V
O_ABS_MAX
I
O
SKTOCC_N Signal
V
O_ABS_MAX
I
OMAX
Notes:
1. 10 kΩ pull-up and 4 kΩ pull-down to a voltage divider from +3.3 V.
7.5.3.1

PCI Express* DC Specifications

The DC specifications for the PCI Express* are available in the PCI Express* Base
Specification. This document will provide only the processor exceptions to the PCI
Express* Base Specification.
Note: The processor is capable of up to 8.0 GT/s speeds.
7.5.3.2

DMI2 / PCI Express* DC Specifications

The DC specifications for the DMI2/PCI Express* are available in the PCI Express
Specification 2.0 and 1.0. This document will provide only the processor exceptions to
the PCI Express
7.5.3.3

Reset and Miscellaneous Signal DC Specifications

For a power-on Reset, RESET_N must stay active for at least 3.5 milliseconds after V
and BCLK have reached their proper specifications. RESET_N must not be kept asserted
for more than 100 ms while PWRGOOD is asserted. RESET_N must be held asserted for
at least 3.5 milliseconds before it is deasserted again. RESET_N must be held asserted
before PWRGOOD is asserted. This signal does not have on-die termination and must
be terminated on the system board.
Datasheet, Volume 1
Parameter
Output Absolute Max Voltage
Output Current
Output Absolute Max Voltage
Output Max Current
®
Base Specification 2.0 and 1.0.
Min Typical Max
— 1.10 1.80
— — 0
— 3.30 3.50
— — 1
§
Units Notes
V 1
μA 1
V
mA
®
Base
CC
69