Cannot Detect Papr; Paper Is Crooked; Paper Not Aligned With Right Guide - Canon imagePROGRAF iPF650 User Manual

Error Message >

Paper is crooked.

Paper loaded crooked was detected when the paper was advanced.
Note
• To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off or
Loose in the Skew Check Lv. setting of the printer menu. However, this may cause jams and printing prob-
lems because paper may be askew when printed. Also, the Platen may become soiled, which may soil the
back of the next document when it is printed.
12

Paper not aligned with right guide.

When paper was loaded, it was not aligned with the guide
on the right side.
802

Cannot detect papr

The paper has come out of the printer.
Paper is crooked.
Messages regarding paper >
Cause
Cause
Cause
Follow these steps to reload the roll.
1. Push the Release Lever back.
2. Adjust the right edge of the roll to make it par-
3. Pull the Release Lever forward.
(See "Loading Rolls in the Printer.")
If this error recurs after you reload the roll, re-
move the Roll Holder from the printer, push the
roll firmly in until it touches the Roll Holder
flange, and reload the Roll Holder in the printer.
(See "Attaching the Roll Holder to Rolls.")
→P.568
Follow these step to reload a sheet.
1. Push the Release Lever back.
2. Pull out the sheet.
3. Pull the Release Lever forward.
4. Reload the sheet, aligning it with the guide on
(See "Loading Sheets in the Printer.")
Follow these step to reload a sheet.
1. Push the Release Lever back.
2. Pull out the sheet.
3. Pull the Release Lever forward.
4. Reload the sheet, aligning it with the guide on the right.
Corrective Action
Follow these step to reload a sheet.
Corrective Action
allel to the orange Paper Alignment Line.
the right.
Corrective Action
→P.572
→P.594
iPF650