Handling Paper
>
Handling rolls
Loading Rolls in the Printer ............................................................................................................................. 572
Changing the Type of Paper ........................................................................................................................... 575
Specifying the Paper Length ........................................................................................................................... 577
Feeding Roll Paper Manually .......................................................................................................................... 582
Attaching the Roll Holder to Rolls
When printing on rolls, attach the Roll Holder to the roll.
6
Rolls have a two- or three-inch paper core. Use the correct attachment for the paper core. The printer comes equipped with
the 2-Inch Paper Core Attachment installed.
Using Rolls with a 2-Inch Paper Core
Holder Stopper (Left Side)
2-Inch Paper Core Attachment
Caution
• Set the roll on a table or other flat surface so that it does not roll or fall. Rolls are heavy, and dropping a roll
may cause injury.
568
Attaching the Roll Holder to Rolls
Handling rolls
>
Roll Holder
(Right Side)
No Attach-
ment Needed
Using Rolls with a 3-Inch Paper Core
Holder Stopper (Left Side)
3-Inch Paper Core Attachment L
Roll Holder (Right Side)
3-Inch Paper Core Attachment R
iPF650