Canon imagePROGRAF iPF650 User Manual page 678

Printer Parts > Control Panel
GL2
Set-
tings
8
662
Menu Settings
>
Setting Item
Line & Pen Select Palette
Pen Setup
Man-
ager
Define Palette
Reset Palette
Smoothing
ThickenFineLines
Description, Instructions
Choose Software to print according to software set-
tings. Choose Palette A or Palette B to print using
the value specified in Define Palette.
Specify the Width, Color, and Line Attributes in
the palette Pen no.. Choose Factory to confirm the
values when Factory is selected in Select Palette.
In Line Attributes, choose No Setting or Circle Set-
ting as the processing for the ends and junctions of
lines.
• If you choose No Setting
If you choose Circle Setting
•
Restore Define Palette to the default palette settings.
Choose whether to print arcs as smooth curved lines
or as multiple connected line segments.
• If you choose Software
Operation is determined by the application. If
nothing is specified by the application, the result is
as shown in the figure.
Note: By default, this is a 72-sided figure
• If you choose Smooth
Select On to print fine lines more distinctly.
iPF650