Printer Parts
>
Printer Specifications
Thickness
Paper Size
Print area
8
Supported width for borderless printing
*1: When supplying paper, use a roll approximately 1,000 mm (1,093.6 yd) or longer.
*2: Printing may not be possible in some cases, depending on the type and size of paper.
Output stacker capacity, in sheets
Regular position
Extended position ( *1
*1: For information on types of paper you can use with the stacker in Extended position, refer to the Paper Reference Guide.
(See "Types of Paper.")
682
Options
Roll Holder Set
Stand
Specifications
>
Sheets
0.07–0.8 mm (0.0028–0.031 in)
Roll width
24-in. Roll (609.6mm), ISO A1/A2 Roll (594.0mm), JIS B2/B3 Roll
(515.0mm), 17-in. Roll (431.8mm), ISO A2/A3 Roll (420.0mm), 16-
in. Roll (406.4mm), 14-in. Roll (355.6mm), 300mm Roll (300.0mm),
ISO A3/A4 Roll (297.0mm), JIS B4 Roll (257.0mm), and 10-in. Roll
(254.0mm)
Sheets
ISO A1, ISO A2+, ISO A2, ISO A3+, ISO A3, ISO A4, ISO B2,
ISO B3, ISO B4, JIS B2, JIS B3, JIS B4, 22"x34"(ANSI D),
17"x22"(ANSI C), 13"x19" (Super B), 11"x17" (Ledger), Legal
(8.5"x14"), Letter (8.5"x11"), 24"x36" (ARCH D), 18"x24"
(ARCH C), 12"x18" (ARCH B), 9"x12" (ARCH A), DIN C2, DIN
C3, DIN C4, 20"x24", 18"x22", 14"x17", 12"x16", 10"x12",
10"x15", US Photo 16"x20", Poster 20"x30", 13"x22", and Poster
300x900mm
Normal size
Printable area
• Rolls
3 mm (0.12 in) from each side
• Sheets
3 mm (0.12 in) from the top, 23 mm (0.91 in) from the bottom, and
3mm (0.12 in) from the left and right sides
For information on the recommended print area, see "Print Area."
→P.683
Borderless printing
Printable area (rolls)
( *2
)
0 mm from the top, 0 from the bottom, and 0 mm from the left and
→P.682
right sides
24-in. Roll (609.6mm), ISO A1/A2 Roll (594.0mm), JIS B2/B3 Roll
(515.0mm), 17-in. Roll (431.8mm), ISO A2/A3 Roll (420.0mm), 14-
in. Roll (355.6mm), 300mm Roll (300.0mm), ISO A3/A4 Roll
(297.0mm), JIS B4 Roll (257.0mm), and 10-in. Roll (254.0mm)
)
→P.682
→P.562
1
20
RH2-26
ST-26
iPF650