Canon imagePROGRAF iPF650 User Manual page 679

GL2 Line &
AdjustFaintLines
Set- Pen
tings Man-
ager
Proc- Warning
essin-
gOp-
PageSizeProcess1
tion
PageSizeProcess2
GL2 Set Print
Inter- EOP Timer
face
Setup
TCP/ IPv4
IP
IPv6
iPF650
Setting Item
IPv4 Mode
Proto- DHCP
col
BOOTP
RARP
IPv4 IP Address
Set-
tings
Subnet Mask
Default G/W
DNS DNS Dync up-
Set- date
tings
Pri. DNS
SrvAddr
Sec. DNS SrvAddr
DNS Host Name
DNS Domain
Name
IPv6 Support
IPv6 StlessAddrs
DHCPv6
DNS DNS State-
Set- Dync full
tings update Addr
Stateless Addr
Printer Parts
Description, Instructions
If fine lines are printed in colors that do not match the
colors of other shapes, selecting Off may help pro-
duce the expected results. However, lines in some
colors may appear broken.
Select On to have any GL2-related warnings dis-
played.
Normally, the area available for printing excludes a
margin required by the printer, and images are posi-
tioned accordingly. Selecting On in this setting elimi-
nates any misalignment of the printing position if the
image itself includes a border.
Selecting On will determine the paper size based on
the image rendering area.
Print GL2 settings information.
Specify the timeout period before cancellation of
print jobs that cannot be received by the printer.
Choose whether the printer IP address is configured
automatically or a static IP address is entered man-
ually.
Specify the protocol used to configure the IP address
automatically.
Specify the printer network information when using a
static IP address.
Enter the IP address assigned to the printer, as well as
the network subnet mask and default gateway.
Specify whether DNS server registration is updated
automatically.
Specify the DNS server address.
Specify the DNS host name.
Specify the DNS domain name.
Specify whether to connect via IPv6.
Specify whether a IPv6 stateless address is used.
Specify whether DHCPv6 settings are used.
Specify whether DNS server registration is updated
automatically.
> Control Panel >
8
663
Menu Settings