Canon imagePROGRAF iPF650 User Manual page 729

6.
Press the Menu button.
If any of the settings is changed, a confirmation message is displayed. In this case, press the OK button.
Important
• Be sure to complete step 6. This will activate the values you have entered.
Note
• By using RemoteUI, you can also specify the object name used for AppleTalk, as well as the printer zone
name.
For details on RemoteUI, see "Using RemoteUI."
Configuring the destination (Mac OS X)
Important
• AppleTalk is supported in Mac OS X 10.2.8–10.4.
Note
• The following procedures are based on Mac OS X 10.4. The method of configuring the destination varies
depending on the version of Mac OS X.
1.
In System Preferences, click Network to display the Network window.
iPF650
Network Setting >
→P.692
Configuring the Destination for AppleTalk Networks
Network Setting (Mac OS X) >
9
713