Canon imagePROGRAF iPF650 User Manual page 603

Man- (See "Cutting Roll Paper After Printing.")
ual
→P.195
→P.589
Paper Choose this option if you want to cut pages by
Cut- pressing Cutter Unit buttons for manual cutting
ting after printing when Auto Cut > No is selected
or Print Cut Guideline is selected in the printer
→P.590
driver.
Otherwise choose this option if you want to cut
the roll edge after loading a roll.
Note
• Automatic and Eject are valid only when you have selected Auto Cut > Yes in the printer driver.
• With Eject, printing does not resume after a series of jobs have been printed continuously until the roll is cut.
• Eject is the preset selection in Cutting Mode for some types of paper. For this paper, we recommend keep-
ing the preset cutting mode.
Cut rolls manually in the following cases:
Eject (waiting for ink to dry after printing)
Important
• When cutting wide printed documents after ejection, have two people support the documents. If the paper
drops, printed documents may be damaged.
• Do not lift the paper when holding printed documents before cutting. If the paper rises, it may affect the
printing quality or cause rough cut edges.
iPF650
Cutting Method
Handling Paper
Printer Setting
Media Manual Auto Cut
Menu >
Paper De-
tails >
(Various
Types of
Paper) >
Cutting
Mode
Cut button Yes
pressed
Specifying the Cutting Method for Rolls
> Handling rolls >
Driver Setting
No Yes
Print Cut
Guideline
No Print
Cut
Guideline
6
587