Canon imagePROGRAF iPF650 User Manual page 420

Windows Software
6.
When there is an IPv6-compatible router in the network environment, select On in Stateless Address.
Additionally, when there is an DHCPv6-compatible server in the network environment, select On in DHCPv6.
7.
Click Set.
8.
Click OK after the Confirmation message is displayed.
9.
Exit imagePROGRAF Device Setup Utility.
4
404
Configuring the IP Address Using imagePROGRAF Device Setup Utility
> Device Setup Utility >
Note
• When there is no IPv6-compatible router or DHCPv6-compatible server, select On in Manual and
enter the IPv6 Address and Prefix Length.
iPF650