Canon imagePROGRAF iPF650 User Manual page 676

Printer Parts > Control Panel
Adjust
Printer
8
Main-
te-
nance
660
Menu Settings
>
Setting Item
Feed Adj.
Auto(OtherPaper)
Priori- Quali-
ty ty
Manual
Adjust Ad-
Length just-
ment-
Print
Chang
e Set-
tings
Adj. Fine Feed
Head Cleaning
Nozzle Check
Replace P.head
Repl. maint cart
Specify this mode with paper not in the Paper Refer-
ence Guide.
The printer prints and reads a test pattern for auto-
matic adjustment of the feed amount. Note that this
function takes more time and consumes more ink
than Auto(GenuinePpr). (See "Automatic Banding
Adjustment (Adj. Quality).")
Use this mode with highly transparent media or other
paper for which Auto(GenuinePpr) or Auto(Other-
Paper) cannot be used.
Print a test pattern for adjustment of the feed amount
based on the type of paper. (See "Manual Banding
Adjustment (Adj. Quality).")
A:High Print a test pattern for particular types of paper to
compensate for paper stretching or shrinkage, after
which you enter the amount of adjustment. (See "Ad-
justing Line Length (Adjust Length).")
B:Standard/Draft
A:High Displayed when you have selected Feed Priority >
Adj. Priority > Print Length.
Adjustment relative to the amount of stretching or
shrinkage of the current paper.
Enter either the adjustment results from Adjustment-
Print or the discrepancy that you measured (as a per-
centage).
For paper that tends to stretch, increase the feed
amount by choosing a higher adjustment value. For
paper that tends to shrink, decrease the feed amount
by choosing a lower adjustment value.
B:Standard/Draft
Displayed when you have selected Feed Priority >
Adj. Priority > Automatic or Print Quality. Fine-
tune the feed amount manually during printing. (See
"Fine-Tuning the Paper Feed Amount (Adj. Fine
Feed).")
Clean the Printhead. (See "Cleaning the Print-
head.")
Choose Head Cleaning A if printing is faint, oddly
colored, or contains foreign substances.
Choose Head Cleaning B if no ink is printed at all,
or if printing is not improved by Head Cleaning A.
Print a test pattern to check the nozzles.
When replacing the Printhead, choose Yes and follow
the instructions on the screen. (See "Replacing the
Printhead.")
Not displayed during a warning message that the re-
maining Maintenance Cartridge capacity is low.
When replacing the Maintenance Cartridge, choose
Yes and follow the instructions on the screen. (See
"Replacing the Maintenance Cartridge.")
→P.737
Description, Instructions
→P.616
→P.618
→P.620
→P.729
→P.730
→P.620
iPF650