Table of Contents
Advertisement
iPF785
Paper is crooked.
Paper is crooked.
Paper loaded crooked was detected when the paper was advanced.
•
To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off or Loose
in the Skew Check Lv. setting of the printer menu. However, this may cause jams and printing problems because
Important
paper may be askew when printed. Also, the Platen may become soiled, which may soil the back of the next
document when it is printed.
Paper not aligned with right guide.
Paper not aligned with right guide.
When paper was loaded, it was not aligned with the guide on the right
side.
Cannot detect papr
Cannot detect papr
Cause
The printer could not detect the paper.
Leading edge detection error.
Leading edge detection error.
Cause
The leading edge of the paper cannot be detected.
User's Guide
Cause
Cause
Corrective Action
Reload the paper as follows.
1.
Remove the paper and press the OK button.
2.
Reload the paper.
(See "Loading Sheets in the Printer.")
(See "Loading Rolls in the Printer.")
Follow these step to reload a sheet.
1.
Push the Release Lever back.
2.
Reload the sheet straight, in the correct position.
(See "Loading Sheets in the Printer.")
Corrective Action
Follow these steps to reload the roll.
1.
Push the Release Lever back.
2.
Adjust the right edge of the roll to make it parallel to the
orange Paper Alignment Line.
3.
Pull the Release Lever forward.
(See "Loading Rolls in the Printer.")
If this error recurs after you reload the roll, remove the Roll
Holder from the printer, push the roll firmly in until it touches
the Roll Holder flange, and reload the Roll Holder in the print-
er.
(See "Attaching the Roll Holder to Rolls.")
Follow these step to reload a sheet.
1.
Push the Release Lever back.
2.
Pull out the sheet.
3.
Pull the Release Lever forward.
4.
Reload the sheet, aligning it with the guide on the right.
(See "Loading Sheets in the Printer.")
Corrective Action
Follow these step to reload a sheet.
1.
Push the Release Lever back.
2.
Pull out the sheet.
3.
Pull the Release Lever forward.
4.
Reload the sheet, aligning it with the guide on the right.
P.358
➔
P.341
➔
Corrective Action
P.358
➔
Paper is crooked.
P.341
➔
P.338
➔
P.358
➔
605
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
