Multi-Sensor Error; Error In Cutter Position - Canon imagePROGRAF iPF650 User Manual

Multi-sensor error

Cause
Direct sunlight or strong lighting may be shin-
ing on the printer and causing the sensor to
malfunction.
The performance of a sensor inside the printer
may be impaired.

Error in cutter position.

Cause
The Cutter Unit stops in the middle of cutting.
iPF650
Corrective Action
Take steps to ensure the printer is not used when exposed to direct
sunlight or strong lighting.
Turn off the printer and wait at least three seconds before restoring
the power.
If the message is displayed again, contact your Canon dealer for as-
sistance.
Corrective Action
1. Push the Release Lever back and remove the paper.
2. Pull the Release Lever forward.
Error Message > Other Messages
Multi-sensor error
>
12
817