Messages Regarding Printheads; Cannot Adjust Printhead; Wrong Printhead; Printhead Error - Canon imagePROGRAF iPF650 User Manual

Error Message >

Messages regarding printheads

Cannot adjust printhead. ................................................................................................................................. 810

Wrong printhead. ............................................................................................................................................. 810

Printhead error ................................................................................................................................................ 810

No printhead .................................................................................................................................................... 811
Execute printhead cleaning. ............................................................................................................................ 811
Cannot adjust printhead.
Cause
The Printhead noz-
zles are clogged.
The Printhead can-
not be aligned; high-
ly transparent film is
loaded.
The Printhead is in-
stalled crooked.
12
Wrong printhead.
An incompatible Printhead has been installed.
810
Printhead error
There is a problem with the Printhead.
Cannot adjust printhead.
Messages regarding printheads
Execute Head Posi. Adj. again, as follows.
1. Press the OK button to clear the error.
2. Print a test pattern to check the nozzles.
(See "Checking for Nozzle Clogging.")
3. Clean the Printhead if the nozzles are clogged.
(See "Cleaning the Printhead.")
4. Execute Head Posi. Adj. again.
(See "Automatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.).")
→P.607
Press the OK button to clear the error.
We recommend using a type of paper that you often use, other than film, for Printhead adjust-
ment.
(See "Automatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.).")
Straighten the Printhead as follows, and then execute Head Posi. Adj. again.
1. Press the OK button to clear the error.
2. Use Head Inc. Adj. to adjust the angle of inclination of the Printhead.
(See "Adjusting Line Misalignment (Head Inc. Adj.).")
3. Execute Head Posi. Adj. again.
(See "Automatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.).")
→P.607
Cause
Cause
>
Corrective Action
→P.728
→P.729
Corrective Action
Open the Top Cover and replace the Printhead with a new one.
(See "Replacing the Printhead.")
Corrective Action
Open the Top Cover and replace the Printhead with a new one.
(See "Replacing the Printhead.")
→P.611
→P.730
→P.730
→P.607
iPF650