Menu Structure - Canon imagePROGRAF iPF650 User Manual

2.
Press the ▲ or ▼ button to enter the value.
Note
• Hold down ▲ or ▼ to increase or decrease the value continuously.
3.
Repeat steps 1 and 2 to complete the settings, and then press the OK button.
Note
• If a confirmation message is displayed regarding the setting you entered, press the OK button. The
setting is applied, and the printer is now in Standby.
Executing menu commands
Menu commands can be executed as follows.
1.
Press ▲ or ▼ to select the action to execute, and then press the OK button.
The menu command is now executed.

Menu Structure

The menu structure is organized by tabs, as follows. Values at right indicated by an asterisk are the defaults.
• Paper Menu
→P.645
• Ink Menu
→P.647
• Job Menu
→P.647
• Set./Adj. Menu
→P.648
For instructions on menu operations, see "Menu Operations."
For details on menu items, see "Menu Settings."
Paper Menu
First Level
Load Paper Roll Paper
Cut Sheet
Eject Paper
Chg. Paper Type Roll Paper
( *1 )
→P.647
Cut Sheet
Chg. Paper Size Sheet Size
Roll Length ( *3
Roll Width ( *4
ManageRemainRoll Off *
On
Paper Details (The paper type is
displayed here.)
( *1
iPF650
→P.656
Second Level Third Level
(The paper type is displayed here.) ( *1
(The paper type is displayed here.) ( *1
(The size of paper is displayed here.) ( *2
)
→P.647
)
→P.647
Head Height
)
→P.647
→P.642
Fourth Level
→P.647
→P.647
→P.647
Automatic *
Highest
High
Printer Parts > Control Panel
Fifth Level
)
)
)
Menu Structure
>
8
645