Paper Not Aligned With Right Guide; Cannot Detect Papr; Leading Edge Detection Error; Paper Cutting Failed - Canon iPF685 User Manual

Paper not aligned with right guide.

Paper not aligned with right guide.

Paper not aligned with right guide.
When paper was loaded, it was not aligned with the guide on the right side.

Cannot detect papr

Cannot detect papr

Cause
The printer could not detect the paper.

Leading edge detection error.

Leading edge detection error.

The leading edge of the paper cannot be detected.

Paper cutting failed.

Paper cutting failed.

Cause
There are sheets left on the
Ejection Guide.
There is a foreign object by
the Output Tray, obstructing
the Cutter Unit.
You are not using the printer
under the recommended en-
vironmental conditions for
the paper.
You are using paper that is
not compatible with automat-
ic cutting.
666
Downloaded from ManualsPrinter.com Manuals
Cause
Reload the paper as follows.
1. Remove the paper and press the OK button.
2.
Reload the paper.
(See "Loading Sheets in the Printer.")
(See "Loading Rolls in the Printer.")
Cause
Follow these step to reload a sheet.
1.
2.
1. Push the Release Lever back and remove the paper.
2.
Load the paper.
3.
Pull the Release Lever forward.
4. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press
the OK button.
Printing will resume, starting from the page on which the error occurred.
(See "Loading Rolls in the Printer.")
1.
Lift the Top Cover and remove the foreign object.
2. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press
the OK button.
Printing will resume, starting from the page on which the error occurred.
Use the printer only where the recommended environmental conditions for the paper are met. Note that
various environmental conditions are recommended for various types of paper. For details on the recom-
mended environmental conditions for paper, see Paper Reference Guide."
(See "Displaying the Paper Reference Guide.")
1.
Specify Manual as the cutting method and use scissors or a cutting tool to cut the roll.
(See "Specifying the Cutting Method for Rolls.")
For information about paper that is compatible with automatic cutting, see the Paper Reference
Guide.
(See "Displaying the Paper Reference Guide.")
2. Push the Release Lever back and remove the paper.
Follow these step to reload a sheet.
1.
Push the Release Lever back.
2.
Pull out the sheet.
3. Pull the Release Lever forward.
4.
Reload the sheet, aligning it with the guide on the right.
Corrective Action
P.394
➔
P.375
➔
Corrective Action
Push the Release Lever back.
Reload the sheet straight, in the correct position.
(See "Loading Sheets in the Printer.")
Corrective Action
P.375
➔
P.365
➔
P.388
➔
P.365
➔
Corrective Action
P.394
➔
User's Guide
iPF685