Installing, Removing, and Replacing
Installing a Stand-Alone 5U Library Control Module
Required tools: None
Use this procedure to install a 5U Library configuration:
1
Prepare the rack to hold modules. See
2
Make sure all tape drives have been removed from the 5U Library Control Module. See
Replacing Tape Drives
3
Make sure all power supplies have been removed from the 5U Library Control Module. See
Replacing Power Supplies
file:///T|/htdocs/stor-sys/ML6000/en/html/ch08.htm[9/17/2012 1:50:35 PM]
Installing the Library in a Rack
for instructions on removing tape drives.
for instructions on removing power supplies.
for instructions on installing a rack-mount kit.
Adding, Removing, and
Adding, Removing, and