Table of Contents
Advertisement
Installing, Removing, and Replacing
1
Y-rail in unlocked, functional position
2
Add the tape drives to the modules. For details, see
3
Add the power supplies. For details, see
4
If your library contains FC I/O blades, install both the I/O blades and the accompanying fan blades in the 9U Library
Expansion Module. For details, see
Replacing the FC I/O Fan
5
Unpark the robot assembly.
a
Gently raise the robot assembly so that it no longer rests on the parking tab.
Caution:
Support the robot assembly by holding onto the broad metal X-axis plate. Lifting the robot by the thin
metal rod will bend the rod. Lifting the robot by the black plastic picker body can damage the robot.
b
With your free hand, move the parking tab in a clockwise direction until it stops in the "unparked" position. When
in the correct position, the parking tab is removed completely from the interior of the module and will not
accidentally swing into the path of the robot.
c
Gently release the robot assembly. It will lower to the bottom module of the library.
file:///T|/htdocs/stor-sys/ML6000/en/html/ch08.htm[9/17/2012 1:50:35 PM]
Adding, Removing, and Replacing Power
Adding, Removing, and Replacing FC I/O Blades
Blade.
Adding, Removing, and Replacing Tape
Drives.
Supplies.
and
Adding, Removing, and
Hide quick links:
Advertisement
Table of Contents
