How To Change Adjustment Values Or Modes - Ricoh FT3813, FT4615, FT4618 Operating Instructions Manual

How To Change Adjustment Values Or Modes

.
1
Access the user tool you want to
adjust. ( See page 58.) The
number of the user tool you se-
lect will be displayed in the copy
counter.
.
2
The default setting will blink in
the Three Digit indicator. Enter
the required setting using the
Number keys.
For the settings, refer to pages 60 ~
67.
If you input a wrong number, press
the Clear/Stop key. Then, enter the
correct number.
.
3
Press the Auto Image Density
key to store the required setting.
If you would like to adjust another
user tool, enter the user tool number.
.
4
Turn the main switch off and on.
KF2Jr-AE-8
USER TOOLS
59