System Settings - Fuji Xerox DocuPrint C2120 User Manual

System Settings

[System Settings] menu is used to make the printer operation settings such as for alarm and
Energy Saver mode.
Item
Low Power Timer
Sleep Mode
Sleep Mode Timer
Audio Tones
Sets the amount of time before the printer enters the Low Power mode.
Specify the value in 1 minute increments.
• [2 Minutes] to [60 Minutes] (default: [2 Minutes])
Refer to
• "2.4 Setting and Exiting Energy Saver" (P. 41)
• "Setting Example: Changing the Energy Saver Setting" (P. 85)
Consumes less electricity than the Low Power mode. Set whether or not to
enable this feature.
• [Enable] (default)
• [Disable]
Refer to
• "2.4 Setting and Exiting Energy Saver" (P. 41)
Sets the amount of time before the printer enters the Sleep mode from the
Low Power mode. Specify the value in 1 minute increments.
• [2 Minutes] to [120 Minutes] (default: [2 Minutes])
Note
• When [Sleep Mode] is set to [Disable] (default: [Enable]), the printer does
not shift to the Sleep mode.
Refer to
• "2.4 Setting and Exiting Energy Saver" (P. 41)
Sets the audio tones that indicate various printer conditions such as errors.
You cannot adjust the sound volume.
• [Control Panel] (default: [On])
Sets whether or not to generate an audio tone when the correct button is
pressed on the control panel.
• [Invalid Key] (default: [On])
Sets whether or not to generate an audio tone when the wrong button is
pressed on the control panel, or when an operation is attempted during an
error.
• [Machine Ready] (default: [On])
Sets whether or not to generate an audio tone to inform you that the printer
is ready to print (such as right after powering on).
• [Job Completed] (default: [Off])
Sets whether or not to generate an audio tone when a job finishes
successfully.
• [Fault Tone] (default: [On])
Sets whether or not to generate an audio tone when a job finishes
abnormally.
• [Alert Tone] (default: [On])
Sets whether or not to generate an audio tone when a fault (such as a
paper jam) occurs and a job is held in a fault state.
• [Out of Paper] (default: [On])
Sets whether or not to generate an audio tone when the printer runs out of
paper and a job is held in a fault state.
• [Low Toner Alert] (default: [On])
Sets whether or not to generate an audio tone when a toner cartridge needs
to be replaced.
• [Base Tone] (default: [On])
Sets whether or not to generate an audio tone when a button, which toggles
between different options when pressed repeatedly, is pressed.
Description
5.2 Description of Menu Items
91