Table of Contents
Advertisement
CentreWare Internet Services Tabs and Options
The following table lists the options displayed on each tab of CentreWare Internet Services.
Tab Name
Status
• General
• Printer Status
• Fault Status
Jobs
• Displays the job status list and job history list.
Properties
• Description
• Configuration
• Usage Counters
• Initialization
• StatusMessenger
• Internet Services Settings
• Port Status
• Port Settings
• Protocol Settings
• Security
Print
• Print Auditron
Support
• Displays a link to customer support.
*
The control panel cannot be used to select options tagged with an asterisk; you must use CentreWare
Internet Services.
Displays the printer's product name, IP address, and status.
Displays the sizes and remaining volumes of the paper loaded in the paper
trays, the status of the output tray and front cover, and the remaining life of
consumables.
Displays the status of the control panel and error information (error location
and details).
Displays the printer's product name and serial number. It also sets the printer's
name*, installation location
*
address
.
Displays the specifications of the print features, page description languages,
and memory information.
Displays the total number of color and monochrome pages printed to date.
Initializes the NV memory or reboots the printer.
*
The printer can notify its status via e-mail to users who have been registered
through this feature. You can set the e-mail addresses of the users and the
items or events that the users will be notified of.
Sets whether or not to automatically update the window of CentreWare
Internet Services and the interval at which the window is updated (in seconds).
Enables or disables each port.
Sets the settings for Ethernet.
*
Sets the details of each protocol.
*
Sets the settings for IPsec. It also creates, manages, or deletes self-signed
certificates and enables SSL/TLS communication.
The data encryption feature is not supported on the model sold in China.
This also enables or disables the Administrator Mode and sets the
administrator ID and password, if the Administrator Mode is enabled.
The default system administrator ID and password are "11111" and "x-admin",
respectively. Make sure to change the password before using the
Administrator Mode.
*
This feature allows you to control user access to the printer. If enabling this
feature, register users who are granted access to the printer.
Options
*
*
, contact person
, and administrator's e-mail
*
1.2 Setting the Network Environment
31
Advertisement
Table of Contents
