Table of Contents
Advertisement
7.11
Adjusting the Fuser Unit Temperature
When you have unsatisfactory printing results, such as printed images or text coming off or
double printing with appropriate margins, adjust the Fuser Unit temperature to solve these
printing problems.
The Fuser Unit temperature can be adjusted within the range of -2 to 2 in increments of 1
for each paper type. The default is "0".
Use the following procedure to adjust the Fuser Unit temperature.
1.
Press the <Menu> button on the control
panel to display the menu screen.
2.
Press the < > button until [Admin Menu] is
displayed.
3.
Press the < > or <Eject/Set> button to
accept the selection.
[Wired Network] is displayed.
4.
Press the < > button until [Maintenance
Mode] is displayed.
5.
Press the < > or <Eject/Set> button to
accept the selection.
[F/W Version] is displayed.
6.
Press the < > button until [Adjust Fuser] is
displayed.
7.
Press the < > or <Eject/Set> button to
accept the selection.
[Plain] is displayed.
8.
Press the < > button until the paper type
you want to set is displayed.
(Example: Recycled)
9.
Press the < > or <Eject/Set> button to
accept the selection.
A screen that allows you to enter the value
is displayed.
10. Press the < > or < > button to set the
value, then press the <Eject/Set> button.
(Example: 1)
11. Press the <Menu> button to return to the
print screen.
170
7 Maintenance
Menu
Report / List
Menu
Admin Menu
Admin Menu
Wired Network
Admin Menu
Maintenance Mode
Maintenance Mode
F/W Version
Maintenance Mode
Adjust Fuser
Adjust Fuser
Plain
Adjust Fuser
Recycled
Recycled
0 *
Recycled
1 *
Advertisement
Table of Contents
