Table of Contents
Advertisement
Operations on the Control Panel
Follow the procedure described below to print a Secure Print job stored from the printer.
Note
• When deleting a Secure Print job without printing, select [Delete] after Step 8 in the following procedure.
1.
Press the < > button on the control panel.
2.
Press the < > or <Eject/Set> button to
accept the selection.
A user ID is displayed.
3.
Press the < > button until the desired user
ID is displayed.
Note
• The user ID is the ID set under [User ID] in the [Secure
Print] dialog box of your print driver.
4.
Press the < > or <Eject/Set> button to
accept the selection.
A screen that allows you to enter a
password is displayed.
5.
Enter your password using the < > and
< > buttons. Use the < > button to move
the cursor.
Note
• Enter the password set under [Secure Print Passcode]
in the [Secure Print] dialog box of your print driver.
6.
Press the <Eject/Set> button to confirm
your setting.
The name of a document stored in the
printer is displayed.
7.
Press the < > button until the desired
document name is displayed.
Note
• The document name is the name (of up to 12 bytes)
set under [Document Name] in the [Secure Print]
dialog box on your print driver.
• When more than one document is stored in the printer,
you can also select [All Documents].
54
3 Print
Print Menu
Secure Print
Select User ID
User1
Password+SET key
[_
]
Password+SET key
[****
]
Select Document
Report1
Advertisement
Table of Contents
