Fuji Xerox DocuPrint C2120 User Manual page 65

E-mail Environment (Printer)
Set the following items under the [Properties] tab on CentreWare Internet Services.
Note
• After changing the settings on CentreWare Internet Services, make sure to click the [Apply] button and
reboot the printer.
• For information about each item, refer to the online help of CentreWare Internet Services.
Item
Port Status E-mail Print
Protocol Settings Machine's E-mail
> E-mail Address
SMTP Server
Address
SMTP Server Port
Number
E-mail Send
Authentication
Login Name
Password
Re-enter Password
POP3 Server Address
POP3 Server Port
Number
Login Name
Password
POP3 Server Check
Interval
APOP Settings
Permitted E-mail
Address
StatusMessanger
Password/
Print Job Password
Setting Item
Select [Enabled].
Set the printer's e-mail address. This address will appear
as "From:" on e-mails sent from the printer.
Set the IP address of the outgoing e-mail server to be
connected via SMTP protocol or the FQDN (Fully
Qualified Domain Name).
Set the port number used on the SMTP server.
Set the authentication method to be used on the SMTP
server.
Set the login user name for the SMTP server.
Set the login password for the SMTP server.
Re-enter the login password for verification.
Set the IP address of the incoming e-mail server to be
connected via POP3 protocol or the FQDN (Fully
Qualified Domain Name).
Set the port number used on the POP3 server.
Set the login user name for the POP3 server.
Set the login password for the POP3 server.
Set the intervals to check for new e-mails on the POP3
server.
Select [Enabled] if the POP3 server supports APOP.
If controlling e-mail reception, set the e-mail addresses
of users who are permitted to send e-mails to the printer.
If you do not specify addresses, the printer will accept e-
mails from all users.
When using a password to restrict printing of e-mails
sent to the printer, enter the password for
[StatusMessenger Password] and [Password for Print
Job].
Description
3.8 Printing Using E-mail - E-mail Print -
65