Table of Contents
Advertisement
Message
Reload Manual
Feeder
Remove Paper
from Manual Feeder
Open & Close
Front Cover
SysError XXX-XXX
Press SET
SysError NNN-NNN
Reboot Printer
Wrong Paper Size
at Manual Feeder
Load Proper Size
XXXXXXXXXXXXXXXX
Wrong Paper Size
Reload MMM
Load MMM
XXXX
MMM=Tray 1, Tray 2, Manual
Feeder
NNN is a numeric value.
122
6 Troubleshooting
Paper is not loaded correctly in the Manual Feeder.
Remove the paper, and then load it again.
When you load the paper, the message [Press the <Eject/Set> button] is displayed.
Press the <Eject/Set> button to print.
However, even if you do not press the <Eject/Set> button, printing starts
automatically in five seconds.
Refer to
• " Loading Paper in the Manual Feeder" (P. 77)
Paper is jammed inside the Manual Feeder. Clear the paper jam from the Manual
Feeder. Open and close the front cover.
Refer to
• "6.1 Clearing Paper Jams" (P. 102)
The firmware download has failed.
Press the <Eject/Set> button. Check the firmware data and re-install it on the printer.
If the problem persists, contact our Customer Support Center or your dealer.
Refer to
• " Consumables" (P. 183)
The firmware download has failed.
Turn off and on the printer. Check the firmware data and re-install it on the printer.
If the problem persists, contact our Customer Support Center or your dealer..
The correct paper is not loaded in the Manual Feeder. Load the following size,
orientation of paper in the Manual Feeder.
Refer to
• "4.2 Loading Paper" (P. 76)
The correct paper is not set in MMM. Set the following size, direction of paper into
MMM.
MMM indicates the number of the tray.
Refer to
• "4.2 Loading Paper" (P. 76)
Condition/Reason/Action
Advertisement
Table of Contents
