Table of Contents
Advertisement
Enabling Data Encryption
To encrypt print data sent to the printer, you must use an IPP port on the printer.
When the printer's IPP port is disabled (the default is [Enable]), enable the port. Then, install
a print driver on your computer and set the output port to IPP.
The following describes how to install a print driver on your computer.
The procedure uses Windows XP as an example.
Note
• For information on how to install a print driver on your computer, refer to the 'CD-ROM Documentation
(HTML)' on the Driver CD Kit.
1.
From the Windows [Start] menu, select [Printers and Faxes].
2.
From [Printer Tasks], select [Add a printer].
3.
In the [Add Printer Wizard] window, click [Next].
4.
Select [A network printer, or a printer attached to another computer], and then click
[Next].
5.
Select [Connect to a printer on the Internet or on a home or office network], and then
enter the following URL into [URL]:
https://IP_Address/ipp/
(where IP_Address is the IP address of the printer).
Click [Next].
6.
Click [Have Disk].
7.
In the dialog box displayed, enter the path for the print driver.
Click [OK].
8.
Select the print driver, and then click [OK].
9.
Set whether to use this printer as the default printer by selecting [Yes] or [No], and
then click [Next].
10. Click [Finish] to finish the setting.
152
7 Maintenance
Advertisement
Table of Contents
