Table of Contents
Advertisement
1.
Press the <Menu> button on the control
panel to display the menu screen.
2.
Press the < > button until [Admin Menu] is
displayed.
Note
• Press the <
3.
Press the < > or <Eject/Set> button to
accept the selection.
[Wired Network] is displayed.
Note
• To deselect an desired item or return to the previous
screen, press the <
• Press the <Menu> button to re-start from the
beginning.
4.
Press the < > or <Eject/Set> button to
accept the selection.
[Ethernet] is displayed.
5.
Press the < > button until [TCP/IP] is
displayed.
6.
Press the < > or <Eject/Set> button to
accept the selection.
[IP Mode] is displayed.
7.
Press the < > or <Eject/Set> button to
accept the selection.
[Dual Stack] is displayed.
8.
Press the < > button until [IPv6] is
displayed.
9.
Confirm your selection by pressing the
<Eject/Set> button.
The display shows [Reboot to apply
Settings] for 3 seconds and returns to the
setting screen.
10. Setup is now complete.
Reboot the printer by turning off and on the
printer.
28
1 Printer Environment Settings
> button to return to the previous item.
> button.
Menu
Report / List
Menu
Admin Menu
Admin Menu
Wired Network
Wired Network
Ethernet
Wired Network
TCP/IP
TCP/IP
IP Mode
IP Mode
Dual Stack *
IP Mode
IPv6
IP Mode
IPv6 *
Advertisement
Table of Contents
