Table of Contents
Advertisement
6.
Slide the width guides until they rest lightly
against the edge of the print media stack.
7.
Insert the tray into the printer, and push
until it stops.
Important
• Do not apply excessive force on the tray. Doing so
could damage the tray or the inside of the printer.
Loading Paper in the Manual Feeder
This section describes how to load paper in the Manual Feeder.
Read the following instructions when loading paper in the Manual Feeder.
Important
• Load paper with the machine turned on.
• When using the Manual Feeder, paper may skew when being printed. In this case, use Tray 1 or Tray 2.
Note
• When loading envelopes in the Manual Feeder, be sure to orient the paper correctly when loading. For
more information, refer to " Loading Envelopes" (P. 45).
1.
Adjust the paper guides of the Manual
Feeder to the size of the paper to be
printed.
Important:
•Adjust the paper guides to the paper size. If you
2.
Hold the paper with both hands, with the
side of the paper to printed on facing
downward. Insert the leading edge of the
paper until it touches the rear side of the
Manual Feeder. Hold the paper until it is
slightly pulled into the printer.
When the printer starts to feed the paper,
release the paper.
adjust the guides too tightly or too loosely, a
paper jam may result.
77
4.2 Loading Paper
Advertisement
Table of Contents
