Fuji Xerox DocuPrint C2120 User Manual page 23

Example of the [Printer Settings] list
Assigning an IP Address on the Control Panel
Use the following procedure to assign a printer's IP address using the control panel.
Depending on the network environment where the printer is to be installed, you also need
to specify a subnet mask and gateway address. Consult your network administrator for the
necessary settings of the printer.
To Set the IP Address
1. Press the <Menu> button on the control
panel to display the menu screen.
2. Press the < > button until [Admin Menu] is
displayed.
Note
• Press the < > button to return to the previous items.
3. Press the < > or <Eject/Set> button to
accept the selection.
[Wired Network] is displayed.
Note
• To deselect an desired item or return to the previous
screen, press the < > button.
• Press the <Menu> button to re-start from the
beginning.
4. Press the < > or <Eject/Set> button to
accept the selection.
[Ethernet] is displayed.
5. Press the < > button until [TCP/IP] is
displayed.
6. Press the < > or <Eject/Set> button to
accept the selection.
If [IPv4] is not displayed, press the < >
button until [IPv4] is displayed.
If an IP address is listed, skip the
following procedure.
If an IP address is not listed, or if
you want to change the current IP
address, assign the setting using
the following procedure.
Menu
Report / List
Menu
Admin Menu
Admin Menu
Wired Network
Wired Network
Ethernet
Wired Network
TCP/IP
TCP/IP
IPv4
1.2 Setting the Network Environment
23