Print Service Settings; Allocate Memory - Xerox 4112 System Administration Manual

Print Service Settings

In Print Service Settings, you select settings that relate to the machine's memory and
miscellaneous features, including tray substitution, paper type mismatch, printing a banner
sheet, and more.
Use the following procedure to access and change the various Print Service Settings.
• From the System Settings screen, select Print Service Settings and select the item to be
set.

Allocate memory

For each interface, you can select the memory capacity for the receiving buffer (temporary
storage for data sent from the client). You can change the receiving buffer capacity depending
on the pattern of use and purpose. Increasing the receiving buffer capacity may allow a client
to be released sooner from an interface.
Tip
If you change the memory capacity settings, the memory is reset. Therefore data stored in
all memory areas is lost.
Xerox 4112/4127 EPS
System Administration Guide
Setups
3-71