Xerox 4112 System Administration Manual page 53

Note
The reference lengths for a sample output of A3 or A4 size printed with [Sample Printout]
are as follows.
Paper Size Image Reference Length in X Direction
A3 400 mm
A4 190 mm
2. Select X% or Y%, and press Change Settings.
3. Enter the offset amount of the X direction scale you measured in Step 1 for Side 1 and Side
2 of X%.
4. Enter the offset amount of the Y direction scale you measured in Step 1 for Side 1 and Side
2 of Y%.
Note
If the scale offset amount is positive, enter a negative value in the adjustment value field.
If negative, enter a positive value.
Image Reference Length in Y
Direction
277 mm
277 mm
Xerox 4112/4127 EPS
System Administration Guide
Setups
3-37